Refine series

• Dimensions:
     240 W x 140 H x 430 D mm (w/o isolated feet)

• Frequency Response:
     +0 /-0.1 dB, 0 to 150 kHz;
     +0 / -1 dB, 0 to 500 kHz;
     +0 / -3 dB, 0 to 2mhz (values for any level to 5V RMS)

• Connector Complement:
     1 x balanced (female XLR) stereo inputs
     2 x single-ended (RCA) stereo inputs
  1 x balanced (male XLR) stereo main and secondary output
     1 x single-ended (RCA) stereo main output
     4 x Solo Link port
     1 x IEC-standard AC mains connector

• Feedback:
     Linear / Standard / Vibrant / Dynamic / ZERO / ONE / FIVE/ TEN

• Slew rate preset:
     5 presets in different μs

• Input sensitivity:
     Nominal level: 3 V RMS.;
     Saturation level: 5V RMS. (max.);
     Nominal input impedance: 10 kOhms.

• Output level:
    Nominal level: 5 V RMS.;
    Maximum output level: 12 V RMS.

• Distortion:
     THD < 0.002%

• Circuit speed:
     Adjustable for slew rate

• Crosstalk:
    > 115 dB between channels (any input to any output, input terminated)

• Noise (Ctd.):
    Signal-to noise ratio on line input > 110 dB

• Power Supply:
    Nominal line voltage: 117 or 234 V;
   Input voltage range: +/- 10 % Maximum power consumption: 75 W

• USD 12,000.00 @pc.

* datasheet -> • <-

• Dimensions:
     240 W x 140 H x 430 D mm (w/o isolated feet)

• Output power:
     [SOLO 80]
     80W@16 ohms; 160W@8 ohms;
     320W@4 ohms; 640W@2 ohms
     [SOLO 120]
     120W@16 ohms; 240W@8 ohms;
     480W@4 ohms; 960W@2 ohms

• Connector Complement:
     1 x balanced (male XLR) stereo output
     1 x single-ended (RCA) stereo output
     1 x Solo-Link port
     1 x IEC-standard AC mains connector

• Bandwidth:
     0Hz to 50 kHz ~ +0 / -0.05dB
     0Hz to 100kHz ~ +0 / -1dB
     0Hz to 150kHz ~ +0 / -3dB

• Phase shift:
      < 15 ̊ in audio frequency range 0Hz to 22kHz

• Distortion:
      THD < 0.006% @ 20~20kHz, 1/2 of max power
      THD = 0.003% @ 1KHz, 40W, 8 ohms

• Output noise:
      < 30uV (20Hz-22kHz)

• Switching residue:
      0.08V @ 1MHz

• Output current:
     32A peak (Solo 80) 48A peak (Solo 120)

• Input impedance:
      600 ohms (solo link)/10k ohms

• Gain: 18dB

• Ripple rejection: 71dB(1KHz)

• DC offset: <8mV

• Protection:
     Over current protection: activated
     Over voltage protection: activated
     Over temperature protection: activated

• Power Supply:
     Nominal line voltage: 117 or 234 V.
     Input voltage range: +/- 10 %

• [ SOLO 80 ] USD 9,000.00 @pc.

• [ SOLO 120] USD 12,000.00 @pc.

* datasheet -> • <-

• Dimensions:
     240 W x 140 H x 430 D mm (w/o isolated feet)

• Output power:
     80W@16 ohms; 160W@8 ohms;
     320W@4 ohms; 640W@2 ohms

• Connector Complement:
     1 x balanced (male XLR) stereo output
     1 x single-ended (RCA) stereo output
     1 x Solo-Link port
     1 x IEC-standard AC mains connector

• Bandwidth:
     0Hz to 50 kHz ~ +0 / -0.05dB
     0Hz to 100kHz ~ +0 / -1dB
     0Hz to 150kHz ~ +0 / -3dB

• Phase shift:
      < 15 ̊ in audio frequency range 0Hz to 22kHz

• Distortion:
      THD < 0.006% @ 20~20kHz, 1/2 of max power
      THD = 0.003% @ 1KHz, 40W, 8 ohms

• Output noise:
      < 30uV (20Hz-22kHz)

• Switching residue:
      0.08V @ 1MHz

• Output current:
     32A peak

• Input impedance:
      600 ohms (solo link)/10k ohms

• Gain: 18dB

• Ripple rejection: 71dB(1KHz)

• DC offset: <8mV

• Protection:
     Over current protection: activated
     Over voltage protection: activated
     Over temperature protection: activated

• Power Supply:
     Nominal line voltage: 117 or 234 V.
     Input voltage range: +/- 10 %

• [ SOLO 80 ] USD 11,000.00 @pc.

* datasheet -> • <-

* datasheet -> • <-

* datasheet -> • <-