Recoil Vibration Guiding System, RVGS (patent pending)

The traditional method to minimize or reconcile the vibration is by using the weight of the speaker for stabilization where the speaker is being put on the floor with spikes or on the speaker stand. This way the vibration is reduced vertically, transferring from the speaker to the spikes or the stand. However, speakers are in fact moving back and forth horizontally when it is operating, i.e. the vibration resides mainly in horizontally rather than vertically. It is a kind of recoil force which is similar to gun shooting.

On the contrary, Ologe intentionally uses one spike at the back, to reconcile the vibration from recoil force and unnecessary resonance. By using the unique exclusive design "ABASE" platform and "ASTAND", most of the recoil force and vibration is being transferred to one spike and then spread out to reconcile. This is our "RVGS" technology and this can solve all vibration created by back and forth movement, thus the driver is working more effectively.

It can also help greatly in attaining clean and transparent sonic tone.

Ologe cabinet is exclusively design.

The size and shape of our cabinet are premeditated to achieve the best performance. The thin body purposely designed to reduce reflection from the side of cabinet. The wide and big front panel had been calculated with rigorous ratio, including all driver distance and position,etc. it can perfectlyprevent diffraction. The speakers are deliberately slanted in a precise angle to reduce diffusion and primary reflection from ground of low frequency.

It got better sound stage and the sound is less affected by environment.

Our tailor-made driver is a breakthrough for the limitation of the fact that low frequency must be produced by certain / large volume speaker for closed cabinet. Since we found large volume inside will affect accuracy of response and dynamic range, even it may better than some cabinet that use tuning port.

To achieve our standard and requirement,we got no choice need to design and produce all parts of our unique driver. From dome, cone, surround & voice coil etc. all build to match specified parameter.Except with the unique flat and thin design, inside also all fill with absorb material, and keep less air as we can,but this special driver still can able to produce low frequency and reach accurate response simultaneously as authenticity. This magic is generated by the unique design of our driver.

The sonic axis of general speaker is 15 - 30 degree, all phrase and tone will decline beyond this angle. Ologe speaker got more than 60 degree in result the sound stage is comparatively more wide, solid and vivid. Oursoundstage extend not only to the front, but also have have more depth since it can also move backward simultaneously. All positions is not 2D as before. It can come close to you or go far away. It is all achieved by cabinet design and unique driver.

Only our monitor got this switchable driver mode.

It can select between active and passive mode in one second. When switching to the active mode, you can experience the dynamic sound and prodigious power of the speaker. When passive mode is selected, soft, subtle sound and more low frequency can perfectly perform. This great performance is contributed by the unique parts of driver and the innovative design of crossover.

Just switch the characteristic of driver to fit for your AV and stereo system performance.